Thermal Design Considerations and Knowledge Gaps for Tilt-Up Walls
September 21, 2023 from 2:30pm to 3:30pm Eastern Standard Time
Tampa Convention Center [Lower Level - Room 124-125]
LEARNING OBJECTIVES
- Define shortcomings on estimates of thermal gradients on tilt-up structures
- Identify how solid and non-composite tilt up panels deform under load
- Identify how partially composite tilt-up panels deform under load
- Discuss future research directions to determine specific thermal loading criteria
TRACK SPONSOR - IconX, LLC
ICONX LLC produces and distributes the IconX Shear Connector line. With a new 5"- 6" connector being introduced to the family this year, we are now able to support you on projects with insulation thickness from 2" all the way up to 6" and everything in between, making IconX the smart choice for your high performance insulated wall panels. The foundational goal of the IconX System was to develop a shear connector to make insulated wall panels longer, stronger, and stiffer than previously available. It was also important for the connector to work with any rigid insulation in panels reinforced with mesh or rebar. Due to the composite action that the IconX Shear Connector facilitates between the wythes of concrete, the total concrete thickness can be reduced by 3 to 4 inches over conventional non-composite panel design, saving you material costs and potentially reducing your crane size and footing and foundation sizes. Simply put, we can do more for less. We are committed to helping you have a successful project with us. Contact us by phone or email, or come meet us at the TCA show to discuss what we have to offer.
Booth number: 315 | Learn more about IconX, LLC >
TRACK SPONSOR - SureBuilT Concrete Forms & Accessories
SureBuilt is a USA manufacturer of concrete construction products, including form ties, handset forms, bar support, shoring, post shores, Stud Rail, Staybox, tilt-up hardware, precast hardware and pipe braces. With locations in Chicago, Tampa, Houston and Los Angeles, SureBuilt supplies independent dealers and their contractor customers throughout North America.
Booth number: 107 | Learn more about SureBuilT Concrete Forms & Accessories >
TRACK SPONSOR - IconX, LLC
ICONX LLC produces and distributes the IconX Shear Connector line. With a new 5"- 6" connector being introduced to the family this year, we are now able to support you on projects with insulation thickness from 2" all the way up to 6" and everything in between, making IconX the smart choice for your high performance insulated wall panels. The foundational goal of the IconX System was to develop a shear connector to make insulated wall panels longer, stronger, and stiffer than previously available. It was also important for the connector to work with any rigid insulation in panels reinforced with mesh or rebar. Due to the composite action that the IconX Shear Connector facilitates between the wythes of concrete, the total concrete thickness can be reduced by 3 to 4 inches over conventional non-composite panel design, saving you material costs and potentially reducing your crane size and footing and foundation sizes. Simply put, we can do more for less. We are committed to helping you have a successful project with us. Contact us by phone or email, or come meet us at the TCA show to discuss what we have to offer.
Booth number: 315 | Learn more about IconX, LLC >
Browse by Event Track / FULL SCHEDULE
Featured Sessions & Events
![The Motor Enclave [TOUR]](https://tilt-up.org/events/images/Motor-Enclave.jpg)
![New Member Reception [Invite Only]](https://tilt-up.org/events/images/Jacksons-Bistro.jpg)
Lowering the CO2 Footprint of Concrete with Innovations in Cement, Concrete, and Construction
September 20, 2023 at 1:30pm
Tilt-Up Lift and Brace Engineering Fundamentals and Potential Lift Day Pitfalls to Avoid
September 21, 2023 at 10:30am
Common Misconceptions and Limitations about the Design of Tilt-Up Insulated Panels
September 21, 2023 at 11:30am
Tilt-Up Concrete Association (TCA)
PO Box 204
402 1st Avenue SE
Mount Vernon, IA 52314
United States
Connect with Us!
About the Tilt-Up Concrete Association
Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction - one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. Over 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.
Site resources: Accessibility
All content copyright 2024 - Tilt-Up Concrete Association, unless noted otherwise.
Homepage slider image credits: (1) Ryan Goubty | Gensler, (2) Simon Menges | David Chipperfield Architects, (3) Bill Timmerman | richärd+bauer, (4) David Lauer | Semple Brown, (5) Matthew McFarland | Forum Studio.