September 20, 2023 from 2:00pm to 5:00pm Eastern Standard Time
Tampa Convention Center [Lower Level - Room 120-121]
This presentation will introduce participants to typical structural engineering designs and construction methods for tilt-up wall panels. The speaker will provide a brief history of tilt-up construction, explaining how panels were analyzed in the past and how codes have evolved to their current form. The presentation may touch briefly on the advantages of tilt-up construction, highlighting the main differences in structural engineering and construction practices. Participants will learn about each stage of panel construction, from casting the slab to completing the structure, and will become familiar with the structural terminology used during the process. The presentation's main focus will be designing a tilt-up panel for various structural forces (in-plane, out-of-plane, vertical, overturning, lifting, bracing, etc.), including typical design checks that should be carried out for most tilt panels. The speakers will also share their best practices for new designers. The target audience for this presentation includes structural engineers who are new or have minimal tilt-up engineering experience, as well as those currently practicing tilt-up design and looking to confirm their approach to typical designs. The presentation will also benefit non-engineers who want to understand what engineers do and what they look for.
SureBuilt is a USA manufacturer of concrete construction products, including form ties, handset forms, bar support, shoring, post shores, Stud Rail, Staybox, tilt-up hardware, precast hardware and pipe braces. With locations in Chicago, Tampa, Houston and Los Angeles, SureBuilt supplies independent dealers and their contractor customers throughout North America.
Booth number: 107 | Learn more about SureBuilT Concrete Forms & Accessories >
ICONX LLC produces and distributes the IconX Shear Connector line. The foundational goal while developing the IconX System was to create a shear connector to make insulated wall panels longer, stronger, and stiffer than previously available. It was also important for the connector to work with any rigid insulation in panels reinforced with mesh or rebar. Due to the composite action that the IconX Shear Connector facilitates between the wythes of concrete, the total concrete thickness can be reduced by 3 to 4 inches over conventional non-composite panel design, saving you material costs and potentially reducing your crane size and footing and foundation sizes. Simply put, we can do more with less. We are committed to helping you have a successful project with us. Contact us by phone or email, or come meet us at the TCA show to discuss what we have to offer.
Booth number: 315 | Learn more about IconX, LLC >
ICONX LLC produces and distributes the IconX Shear Connector line. The foundational goal while developing the IconX System was to create a shear connector to make insulated wall panels longer, stronger, and stiffer than previously available. It was also important for the connector to work with any rigid insulation in panels reinforced with mesh or rebar. Due to the composite action that the IconX Shear Connector facilitates between the wythes of concrete, the total concrete thickness can be reduced by 3 to 4 inches over conventional non-composite panel design, saving you material costs and potentially reducing your crane size and footing and foundation sizes. Simply put, we can do more with less. We are committed to helping you have a successful project with us. Contact us by phone or email, or come meet us at the TCA show to discuss what we have to offer.
Booth number: 315 | Learn more about IconX, LLC >
Lowering the CO2 Footprint of Concrete with Innovations in Cement, Concrete, and Construction
September 20, 2023 at 1:30pm
Tilt-Up Lift and Brace Engineering Fundamentals and Potential Lift Day Pitfalls to Avoid
September 21, 2023 at 10:30am
Common Misconceptions and Limitations about the Design of Tilt-Up Insulated Panels
September 21, 2023 at 11:30am