Tilt-Up Concrete Association | 402 1st Ave SE, Mt. Vernon, Iowa 52314 | Phone: (319) 895-6911 | Member Login | Membership Renewal

 

Awards | TCA Tilt-Up Achievement

Beacon Pointe

2000 TCA Tilt-Up Achievement Award - Office Division

Article tools: Coming soon!

Codina Development Corporation of Coral Gables, Florida, wanted a class A structure with the quality and design complexity generally associated with precast, but on a tighter schedule and budget.

The result was two Tilt-Up construction firms working together to complete this 102,732 sq. ft. building at a cost of $57 per square foot.

The Tilt-Up subcontractor was Woodland Construction Co. of Jupiter, FL. Woodland concentrated on proper construction procedures and finishes, and turned to ProDeCon, LLC, of Norcross, GA, to design and detail the Tilt-Up panels. ProDeCon provided coordinated field drawings, including all geometry, reinforcing, embeds, lifting and bracing design.

By working together, these two firms were able to further shorten the time needed to construct such a distinctive and quality building.

The four-story building is full of windows. Panels nearly sixty feet tall had to be built, with more open area than solid. Each panel weighed in excess of 125,000 pounds. Due to the large size of the panels and the relatively small footprint of the building, all panels were cast on laser screeded casting beds.

For economy, and to allow the elimination of exterior columns, the Tilt-Up wall panels supported all of the elevated precast floors and roof framing. This required that all of the panels be braced to the exterior of the building, allowing the interior precast framing to be erected without obstruction.

The architectural detail of this building was created by recessing the windows and forming in faux ornamental pier caps. The entrance is a recessed Tilt-Up supported wall of glass a story higher than the rest of the building.

Three dimensional surface effects were used extensively. Of special note is the distinctive treatment of the ground floor of the building, where precast stacked stone panels were stacked outside and against the Tilt-Up walls. Angled "support" columns on the ground floor only add interest at the eye level.

Adding to the classy appearance of this property, all exposed corners were mitered which, considering the height of the panels, required that the mitered edge be formed to extremly tight tolerances.

The building was completed in June, 1999.

Project Specifics

Project Floor Area
102,732 sq ft
(9,544 sq m)

Participating TCA Members

Woodland Tilt-UpSustaining Member iconSustaining Member icon
Tilt-Up contractor

About the TCA

Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction, a method in which concrete wall panels are cast on-site and tilted into place. Tilt-Up construction is one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. At least 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.

Follow Us

We use LinkedIn, Twitter and YouTube to disseminate information about the Tilt-Up industry, gain new members and inform developers, owners and architects about the benefits of using Tilt-Up.

Popular Links

The following bookmarks jump to the most popular destinations on this site.