Tilt-Up Concrete Association | 402 1st Ave SE, Mt. Vernon, Iowa 52314 | Phone: (319) 895-6911 | Member Login | Membership Renewal

 

Awards | TCA Tilt-Up Achievement

Technology Way Warehouse

2015 TCA Tilt-Up Achievement Award - Warehouse/Distribution Division

Article tools: Coming soon!

This 104,307-square-foot speculative warehouse project was a natural fit for the tilt-up method of construction because the tilt-up method represents the best convergence of several key advantages when compared to alternate methods of construction, advantages that include; cost efficiency, durability, interior planning flexibility and structural efficiency. These advantages were realized on this project in the following ways:

Cost efficiency: The reduced labor requirement combined with a project construction duration of less than 10 months resulted in a construction cost that would be impossible to match with any other building method.

Durability: Due to concrete's inherent strength and durability (and ease of maintenance), it is hard to imagine a building type that can "outlive" a tilt-up. The project expects a total useful life span of not less than 80 years.

Interior planning flexibility: The ability of the tilted walls to carry the roof loads in the long axis of the building resulted in fewer interior columns compared to other construction methods. Further, by eliminating all recesses at the entry storefront windows and doors, the project allows every interior square foot of area to be utilized by the building's tenants, further enhancing the efficiency and flexibility of the project.

Structural efficiency: The inherent structural properties of steel-reinforced concrete exterior walls allowed the design team to capitalize on the ability of the tilt-up walls to resist both vertical and horizontal loads without the need for additional interior bracing frame elements.

For these reasons, there was little time spent considering alternate methods of construction. The client and project team all had a keen understanding of the benefits of the tilt-up system.

The discussion next turned to design: "How can design, unto itself, result in a better built product?" The team explored several design approaches and considered how best to address the local CC&R's prescriptive requirement for "significant sloped roof elements". To address this requirement, the building celebrates the three primary building corners with standing-seam butterfly roofs atop three corner towers that reach a height of 46-feet. Narrow glazing "strips" that span vertically to a height of 35-feet are strategically placed at the edge of each tower to create additional visual punctuation of the building's front facade. The design also explores the use of concrete reveals not merely as "lines on the wall" but as a method to create a textural treatment by stacking the horizontal reveals vertically at 12-foot intervals. Alternating paint colors, foam banding, steel canopies and parapet height variations further articulate the facade. Together, these elements combine to create a vocabulary of parts and treatments that effectively dissolve the overall mass of the building, resulting in a refined and sophisticated aesthetic that is as squarely modern in style as it is in function.

Photos

Project Specifics

Project Wall Area
62,622 sq ft
(5,818 sq m)
Project Floor Area
103,410 sq ft
(9,607 sq m)
Project Footprint
103,410 sq ft
(9,607 sq m)
Tallest Panel
45 ft 3 in
(13.81 m)
Widest Panel
32 ft 3 in
(9.85 m)
Largest Panel
1,050 sq ft
(97.5 sq m)
Heaviest Panel
130,579 lbs
(59,230 kg)

Participating TCA Members

Dayton Superior CorporationSustaining Member icon
Lifting hardware
Nox-Crete Products GroupSustaining Member icon
Form release
Alston Construction CompanySustaining Member icon
General contractor
Sinclair Concrete
Tilt-up contractor
RMW architecture & interiors
Project architect
HD Supply Construction & Industrial White Cap
Tilt-up accessories

About the TCA

Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction, a method in which concrete wall panels are cast on-site and tilted into place. Tilt-Up construction is one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. At least 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.

Follow Us

We use LinkedIn, Twitter and YouTube to disseminate information about the Tilt-Up industry, gain new members and inform developers, owners and architects about the benefits of using Tilt-Up.

Popular Links

The following bookmarks jump to the most popular destinations on this site.