Tilt-Up Concrete Association | 402 1st Ave SE, Mt. Vernon, Iowa 52314 | Phone: (319) 895-6911 | Member Login | Membership Renewal

 

Awards | TCA Tilt-Up Achievement

Providence Medical Office Building

2013 TCA Tilt-Up Achievement Award - Office Division

Article tools: Coming soon!

The Providence Medical Office Building features a colonnade that articulates the building's perimeter. The colonnade is composed of pilasters which are 3 feet wide, 28 feet tall and 6½ inches deep, constructed of tilt-up concrete panels. Early in the design process it was intended that these pilasters would be made of steel framing, but after analysis, it was determined that the desired architectural look could be achieved at a better value by using the tilt-up method. The pilasters share a common footing with the building's panels and are connected by way of embeds and welds.

Installation of the colonnade required "bucking out" a small section of the tilt panel walls at each pilaster for an added cable connection. As each pilaster was picked up by the crane, the additional cable was used to pull it to its final position. The top of each pilaster interfaces with a foam and acrylic cornice system that wraps the entire perimeter of the building.

Many subtle architectural features (including precast concrete sills, brick veneer pilasters, stained concrete panel sections framed by reveal strips and the tilt panel colonnade) create a building with strong architectural appeal, yet maintain the cost efficiency and durability of concrete tilt construction.

Project Specifics

Project Wall Area
13,503 sq ft
(1,254 sq m)
Project Floor Area
27,850 sq ft
(2,587 sq m)
Project Footprint
14,494 sq ft
(1,346 sq m)
Tallest Panel
32 ft 3 in
(9.84 m)
Widest Panel
36 ft 1 in
(11.00 m)
Largest Panel
1,134 sq ft
(105.3 sq m)
Heaviest Panel
76,790 lbs
(34,831 kg)

Participating TCA Members

About the TCA

Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction, a method in which concrete wall panels are cast on-site and tilted into place. Tilt-Up construction is one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. At least 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.

Follow Us

We use LinkedIn, Twitter and YouTube to disseminate information about the Tilt-Up industry, gain new members and inform developers, owners and architects about the benefits of using Tilt-Up.

Popular Links

The following bookmarks jump to the most popular destinations on this site.