Tilt-Up Concrete Association | 402 1st Ave SE, Mt. Vernon, Iowa 52314 | Phone: (319) 895-6911 | Member Login | Membership Renewal

 

Awards | TCA Tilt-Up Achievement

Mather Commerce Center

2006 TCA Tilt-Up Achievement Award - Office Division

Article tools: Coming soon!

The first phase of a six building, planned corporate office campus, this facility utilized Tilt-Up because of its ease and economy of construction and its aesthetic possibilities.

With a strong appreciation for modern architecture, the client wanted a contemporary building that would create a strong identity for the development. As such, an architectural concept for the building was developed that incorporates the mass into interlocking volumes and voids. This composition is achieved using two different Tilt-Up panel types and window treatments to show differentiation between the volumes and break up the boxy appearance associated with Tilt-Up. New methods and techniques were developed in the casting process to create a unique finish for the panels.

The facility is composed of two different types of panels that vary in height, finish, texture, window composition and color. One set of panels was left raw, right out of the casting bed and was designed to resemble cast-in-place concrete with snap-tie holes and panel joints cast into the panels. The other set of panels, which are painted, are carefully composed with deep reveals, formliner texture and color that coincides with the pattern of the aluminum window system. A recessed inset of aluminum extends from the windows into the Tilt-Up panel tying the two together. Locations where the two volumes come together define entries into the building that are highlighted by two-story lobbies, glass-enclosed staircases and metal canopies.

The Tilt-Up panels that were left raw to resemble cast-in-place concrete required extraordinary skill and care in order to create the correct finish and cast-in snap-tie holes and panel joints. Treated sheets of MDF were screwed down to the casting bed with gaps in between to achieve the desired look. These panels feature continuous ribbon windows which wrap around corners of the building. Where the raw panels meet the joining volume of the rest of the building, the ends are left freestanding to further emphasize the cast-in-place look. At the main entry, the raw Tilt-Up panels frame a glass-enclosed stair and span across the entry defining the lobby.

Project Specifics

Project Floor Area
72,600 sq ft
(6,745 sq m)
Tallest Panel
40 ft 0 in
(12.19 m)
Largest Panel
1,200 sq ft
(111.5 sq m)
Heaviest Panel
40,000 lbs
(18,144 kg)

Participating TCA Members

About the TCA

Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction, a method in which concrete wall panels are cast on-site and tilted into place. Tilt-Up construction is one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. At least 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.

Follow Us

We use LinkedIn, Twitter and YouTube to disseminate information about the Tilt-Up industry, gain new members and inform developers, owners and architects about the benefits of using Tilt-Up.

Popular Links

The following bookmarks jump to the most popular destinations on this site.