Tilt-Up Concrete Association | 402 1st Ave SE, Mt. Vernon, Iowa 52314 | Phone: (319) 895-6911 | Member Login | Membership Renewal

 

Awards | TCA Tilt-Up Achievement

Bedford Baptist Church

2004 TCA Tilt-Up Achievement Award - Spiritual Division

Article tools: Coming soon!

A turn-key addition, the Bedford Baptist Church was initially slated to be constructed with conventional brick veneer with a concrete foundation. However, the client opted to switch to Tilt-Up because the use of inlay brick eliminated the high elevation work. Further, Tilt-Up allowed the church to continue to operate during the entire renovation.

The construction team’s ability to achieve the same architectural statement as the original church that was constructed in 1963 was one of the mitigating factors that judges believed made in worthy of an award.

Since the project was an addition, the Tilt-Up panels had to match the existing brick and window detailing. To aid in this task, the construction team reused the sills from the original windows in the new Tilt-Up panels. Brick returns and corners were used on triangular windows, and the six-foot diameter round window and a 15-foot round semi-circle opening were trimmed in thin brick.

The panels acted as retaining walls and provided the foundation walls for the basement level, which eliminated an expensive full basement wall that would have impaired access to the church during the project. Further, the load-bearing properties of the panels eliminated all support angles and a large gluelam beam designed to hold the high roof was not required. Irregular shaped panels were used to form the pitch of the church roof.

Tilt-Up eliminated moisture penetration concerns typically associated with traditional brick in this market.

Photos

Project Specifics

Project Floor Area
4,200 sq ft
(390 sq m)
Tallest Panel
37 ft 9 in
(11.51 m)
Largest Panel
910 sq ft
(84.5 sq m)
Heaviest Panel
58,100 lbs
(26,354 kg)

Participating TCA Members

B. D. Stevens LimitedSustaining Member iconSustaining Member icon
General contractor, Tilt-Up contractor
Innovative Brick Systems LLCSustaining Member icon
Cast-in materials
Nox-Crete Products GroupSustaining Member icon
Bond breaker
Meadow BurkeSustaining Member icon
Lifting hardware

About the TCA

Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction, a method in which concrete wall panels are cast on-site and tilted into place. Tilt-Up construction is one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. At least 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.

Follow Us

We use LinkedIn, Twitter and YouTube to disseminate information about the Tilt-Up industry, gain new members and inform developers, owners and architects about the benefits of using Tilt-Up.

Popular Links

The following bookmarks jump to the most popular destinations on this site.